Home > Hard Drive > I Want To Install A 3rd HDD But System Will Not Boot Up

I Want To Install A 3rd HDD But System Will Not Boot Up


It is best to leave the case cover off for now in case you need to fiddle with something or troubleshoot the installation.If you did not use a controller card, enter Up until yesterday I used to have only Drive nº1 connected to the computer, but today I tried to connect both of them and now the BIOS only detects Drive nº2 It won't be that bad. Reply tysun on August 12, 2007 at 5:44 pm I install a Sata WD drive into my w2k pc. his comment is here

Happy i figured it ou. Older Windows versions, such as 98 and Me, make you do this from DOS. Achim Pulger March 12, 2013 7:38 pm Reply # Hi All, as it seems that a lot of knowledge and experiences are present here, i would like to ask for help. David Morgan December 22, 2015 6:05 pm Reply # Well downloaded the surface scanner……does not function..just sits there,, pushing various buttons (mount,, nothing,,,scan,, please mount a drive first, etc..

Windows Won't Boot Without Second Hard Drive

Not one problem with your directions!!!Any Idea if I can have a Windows 2000, Windows XP and Windows Vista 64 all in the same wireless network? As for not booting up with the third drive, are you sure your not plugging it into a RAID SATA spot on your motherboard, with the BIOS not expecting you to It's been working well for past 1.5 years but week back, it reported "Format Not Recognized" while playing a movie. Any idea on what i might be doing wrong?Tom Reply Scott on January 27, 2009 at 2:01 pm Great, thank you!

You will be prompted during the first part of setup to partition and format your drive; if you are using Windows 2000, XP or Vista, make sure to use the NTFS Dave Are there any jumpers on the drive? Reply Fred on August 16, 2009 at 2:08 pm Thanks to your excellent instructions I was able to install a new hard drive with only minor pain. Removed Hard Drive Windows 10 Won't Boot It won't let me do anything. "I'm pulling out my hair here!" Please help.

So I asked could you save my lost data and I will spend more money with you and he said no? Windows 10 Won't Boot Without Second Hard Drive I originally bought my NO NAME computor from him back in December It first went down in March probally from trying to download free music off Kazzaa. This is that thing someone said CANNOT happen!!!!! How to write a fraction in Microsoft Excel?

Unfortunately, hard drives are a commodity and need to be treated as such. Windows 7 Won't Boot After Removing Secondary Drive Reply curt on July 12, 2009 at 9:49 am You probably already figured it out…. Dave Sounds like something has happened to the boot loader. after some time the display showing hard drive is not found,and showing only one on screen f3=exit..

Windows 10 Won't Boot Without Second Hard Drive

On the PC I managed to wipe the partitions and create a new fresh GPT partition map and FAT32 partition. Article Tools: | Print Research by Category Desktops Laptops Tablets & E-Readers Printers PC Components Research By Brand Samsung Apple Dell Hewlett-Packard Lenovo Connect With Us Contact Info Meet the Editors Windows Won't Boot Without Second Hard Drive IDE data cables, also keyed, usually have a red stripe that lines up with the "pin 1" marking on the drive. Windows Won't Boot With Second Hard Drive D+ Reply Stefen Kaur on November 11, 2008 at 12:50 pm I have a question.

what do i have to do to get the new c drive to work. Do not force them out. Did you look under disk management (right click Computer, select Manage, then Disk management). Where and how are the cables connected? Windows Won't Boot After Removing Hard Drive

Now if the drive is not showing up in the disk manager, then at this point if the drive is in an enclosure you should try to remove it from the Master would be the end of the IDE cable and Slave the inner connection. Thanks, hope to hear from you or another one of the commenters soon. http://collinsoffice.net/hard-drive/i-changed-my-harddisk-how-can-i-get-system-reload.html In pc Disc drive C or D not showing.

Does he need an actual Windows Vista disk instead of the ones you make when you first get the computer? Installed New Hard Drive And It Wont Boot If you are adding a second drive, simply choose a connector on the same ribbon cable that is not used. How would they know whether they have an IDE or SATA hard drive if they have never even heard of those abbreviations before?

Dave Not sure if this is a Sata drive or an IDE drive….but have you confirmed the jumpers are set properly?

I would also consider flashing the BIOS if you're comfortable doing so-just in case this is a known issue that was fixed in an update. ron i have external The way I described is the only way it will spin up on boot in a PC, is there any software that can fix this, Thanks. So i can't see my hard in bios or in my computer, what should i do next? Computer Won't Power On With Hard Drive Plugged In Here is my problem, the drive rails that came with my case do not fit on the hard drive.

What could be the problem here ? That makes a bit sense because the shown size is absolutely crap. the one you just bought at best buy.. check over here I can pull it out by just removing 1 screw.

Check the BIOS to make sure that the drives are all being recognized. You found this article on a website specialising in PC mechanics, aimed at it's own users, who are already computer literate. An error (403 Forbidden) has occurred in response to this request. I am at a dead end and need help.

Wow again thank you Reply Eric on October 13, 2009 at 11:16 pm Great instructions.