Home > Hard Drive > I Don't Think My New Hard Drive Is Configured Correctly

I Don't Think My New Hard Drive Is Configured Correctly

Contents

Take Action It's time to speak out for your right to repair Illinois, This year, the people of Illinois have a chance to guarantee their right to repair their equipment—like tractors, To format the drive in Windows 2000 or XP, right-click on My Computer and go to "Manage". On some drives, "master is master is master", but on other drives, there is a separate setting for "Master with slave" and "Master without slave". Failure to disconnect such devices could result in serious data corruption.Boot up the computer.Insert your Windows installation CD/DVD into the CD/DVD drive.Reboot the computer, and it should boot up into the http://collinsoffice.net/hard-drive/i-need-to-replace-my-hard-drive-can-you-tell-me-what-hard-d.html

It actually ruined the drive. Any drive in the case could get fried when the main drive gets fried... If I'm replacing my hard drive I understand that in order to clone the hard drive I need to have the new hard drive act as the slave drive which I Assuming I have an IDE now, can it simply be replaced by a SATA drive or is the motherboard specific to each?

Hard Drive Problems Troubleshooting And Repairing

If you need to go cheap and not have problems like you do with Emachines go Acer. Flag Permalink This was helpful (0) Collapse - Read the problem by fisherv / September 21, 2007 4:52 PM PDT In reply to: RE: Installing a Second Hard Drive Appman:Nice advice Sent it back and the techs said it was because of not disconnecting first. In part because the Ghost image didn't work - and I conceded to my computers wish to not use it as a Primary still acknowledge the existence of the other 4

But if the files are critical and you are willing to pay someone to recover them for you, the rule is "don't just do something; stand there." Any steps you take Drive makers and third-party utility vendors offer software that claims to repair hard drive problems. I owe you one. Hard Disk Troubleshooting Pdf It is the source of most of the computer's operations.

However, as simple as the process might seem, there's a whole lot that can go wrong. Hard Drive Problems And Solutions Especially from WinXP 32bit to Vista 64bit. by Watzman / September 21, 2007 10:42 AM PDT In reply to: My second hard drive is doing the peek-a-boo thing The thing that is puzzling here is the "intermittent" nature W4605.

That will let the disk run fast, and the CD won't care. Hard Drive Troubleshooting Flowchart One error in particular, however, is more important than others to watch out for. Before you do this, make sure the CD's IDE cable is an 80-wire cable or the hard drive will be very slow. Good job A+ on te article Reply RepairGal on January 8, 2009 at 9:42 pm Anyone who doesn't understand what a "jumper" is shouldn't be trying to change out their hard

Hard Drive Problems And Solutions

This procedure, of course, risks doing severe damage to the drive, and should be employed only if all other measures fail. Your blog saved the day. Hard Drive Problems Troubleshooting And Repairing by ronjon / September 21, 2007 11:57 AM PDT In reply to: My second hard drive is doing the peek-a-boo thing "I made it the slave drive and reformatted it. Hard Drive Problems Symptoms I was concerned about the watermark issue with the secure boot.

It requires manufacturers to provide owners and independent repair shops with access to repair information and replacement parts—so you have the resources you need to fix things quickly and affordably. http://collinsoffice.net/hard-drive/if-i-plug-in-my-d-hard-drive.html Do not force them out. emails appreciated Reply CHaz from Moscow on November 1, 2007 at 7:54 pm I have been trying to install a drive and my computer says CHange from stand alone to master. Check to see if the hard drive is spinning. External Hard Disk Troubleshooting

I can pull it out by just removing 1 screw. PLUS THE FACT THAT I HAVE THAT DESKTOP WATERMARK. However, I am still stumped. navigate here This section helps you solve many of the problems you may encounter as you prepare a new (or even existing) drive for use.

The manufacturer should answer that question.Hope that gives you some ideas. Hard Disk Troubleshooting Software Reply vince on March 26, 2013 at 2:21 pm for one if the NEWB reads this it will perk his interest. But in Windows one of the two drives doesn't appear.

This just doesn't look right to me.

Mac OS and various Linux distributions can be configured to boot from an external drive in some cases. Please see the following articles for instructions:  Instructions in Windows 8/7/Vista Instructions in Windows XP  Please check the motherboard compatibility if the drive is not detected in the Disk Management application.Back Check your system documentation for an explanation of system beep codes. Troubleshoot Hard Drive Windows 7 What are these cables called so I can purchase one?

HB 2122, or the Fair Repair Act, guarantees our right to repair digital equipment like computers, refrigerators, cell phones and tractors. I only have 2 SATA ports on my motherboard. Now you should see only your SSD and DVD Writer. 10. http://collinsoffice.net/hard-drive/i-installed-at-new-hard-drive.html After upgrading to Windows 10 it creates new recovery partitions as the previous recovery partition won't work with Windows 10.

Reply Dave on November 24, 2008 at 1:34 pm Hi I bought this on Ebay, it works realy well, you can connect any hard drive to a usb socket. New box HD is SATA. That aside.. Can I put a [ Solved ] and a green check mark on the title of my topic? ---The stupid cable came with an installation CD, but it only came with

Sorry if this is not what you wanted to hear. Many makers put an 80-wire cable on the hard drive and a 40-wire cable on CD, since the CD is slower and doesn't need the speed an 80 wire cable supports. English ASUS Republic of Gamers [ROG] | The Choice of Champions Overclocking, PC Gaming, PC Modding, Support, Guides, Advice > Notebooks > G Series Gaming Notebooks > G55VW upgraded to Each manufacturer has different jumper settings, so I can't give you exact instructions here.

You can check your system's BIOS.